Poarta bi-fold DECORIO V-King
V-KING
V-KING
INDUSTRIAL
FOLDING GATE
Application: V-KING gate is a perfect solution for
logistics centres, sea ports, airports and other industrial
areas. The gate combines advantages of double-leaf
gate and barrier, providing access control or traffic
flow management.
SAFE
TRACKLESS
The gate as standard
features 10 safety edges,
two sets of photocells
and two emergency safety
switches. Compliance with
EU Directives. Standard
PN EN 13241-1 + A1:2012.
The gate is hung on posts
by means of hinges
and link arms. The gate
requires no additional
ground or overhead track.
HIGH-SPEED
AND TROUBLE-FREE
ROBUST
CONSTRUCTION
Equipped with the
fastest available DAAB
automation which enables
the speed of up to 1 m/s.
The materials and
solutions applied allow
for the continuous
operation of the gate.
Drive for intensive
operation.
V-KING INDUSTRIAL FOLDING GATE
TECHNICAL DATA SHEET
Product description
General description
Application
High-speed and durable V-KING gate. Opening/closing
speed up
to 1 m/s. The gate is dedicated for continuous operation, and equipped
with durable DAAB automation and advanced EP 104 control unit.
The gate is safe. It is available in single and double-leaf versions.
Corrosion protected by hop-dip galvanising or Duplex system: hot-dip
galvanising + polyester coating.
Application: V-KING gate is a perfect solution for logistics centres,
sea ports, airports and other industrial areas. The gate combines advantages of double-leaf gate and barrier providing access control or traffic
flow management.
Technical characteristics
Gate leaf
Frame welded from 60x60 mm hollow sections in single-leaf gates up to 2950 mm wide and in double-leaf gates up to 5950 mm wide. Frame welded from 80x80 mm hollow sections in single-leaf gates from 3000 mm wide and double-leaf gates from 6000 mm wide. The leaves are folded and
connected by units set on rolling bearings. Link rods and rod joints are made of stainless steel. The leaves feature stainless steel LOCIN
OX guiding
cables. Receiver and roller are installed in the middle of the gate. The gate is available as double-leaf or single-leaf (left or right handed) version.
2|9
V-KING double-leaf gate
with 25x25 mm hollow section infill
V-KING single-leaf right-handed gate
with 25x25 mm hollow section infill
V-KING double-leaf gate
with Vega 2D Super welded mesh infill
V-KING single-leaf right-handed gate
with Vega 2D Super welded mesh infill
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
V-KING INDUSTRIAL FOLDING GATE
TECHNICAL DATA SHEET
New
New system infills
Round tube section infill ø 25mm
welded to the structure.
Closed box section infill 25x25mm,
CARO arrangement, welded to the structure.
Also available as an extended infill.
Also available as an extended infill.
Closed box section infill 30x18mm, welded
to the structure.
Also available as an extended infill
Standard colours
DUPLEX System
Combining hot-dip galvanising with powder coating in DUPLEX
system ensures
the extended durability of WIŚNIOWSKI fencing.
Despite the weather conditions, we have a lasting peace of mind
that WIŚNIOWSKI fencing will be visually appealing.
The gates are available in hot-dip galvanised, or galvanised and
polyester coated version. The gates are available, as standard, in
the colours as follows: RAL 5010, RAL 6005, RAL 7016, RAL 7030,
RAL 9016, RAL 9005/MAT.
RAL 6005 Moss green
NON-CHROME
PASSIVATION
IRON
PHOSPHATISING
ZINC LAYER
(HOT-DIP GALVANISING)
RAL 7016 Anthracite grey
STEEL
ELEMENT
RAL 7030 Stone grey
RAL 9016 Traffic white
RAL 9005/MAT Jet black
Note: The actual colours and gloss levels may vary from those shown in this brochure.
3|9
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
DUPLEX
RAL 5010 Gentian blue
POLYESTER COATING
(POWDER COATING)
V-KING INDUSTRIAL FOLDING GATE
TECHNICAL DATA SHEET
Gate post
DIMENSIONS OF GATE POST
For single-leaf gates up to 2950 mm wide and double-leaf gates up
to 5950 mm wide, the post is made
of 160x160 mm section, while
for single-leaf gates from 3000 mm wide and double-leaf gates from
6000 mm wide, the post is made of 200x200 mm section.
B
C
D
Post made of
160x160 mm section
A
340
240
ø20
Post made of
200x200 mm section
400
300
ø24
Fig. 1 Post cross-section.
Automation
DAAB drive unit
V-KING gates are equipped with special-purpose automation
manufactured by DAAB company. Operating speed is up to 1 m/s.
Designation: intensive operation. In double-leaf gates of up to 7000
mm in width (Sj) and single-leaf gates of up to 3500 mm in width (Sj),
MT type drive unit is applied. In double-leaf gates of above 7000 mm
in width (Sj) and single-leaf gates of above 3500 mm in width (Sj),
MK type drive unit is applied. The drives are installed on the main posts.
Torque is transmitted to the leaves by a system of arms. The control
unit is DAAB’s EP 104-1 or EP 104-2 installed in the cabinet rated IP 65.
The control unit can be equipped with extra options to provide a w
ide
selection of active and passive user’s safety.
As an option, drives are available in stainless steel casing - type MT1H
or MK1H.
DAAB drive unit - type MT
DAAB drive unit - type MK
Power
output
kW
Speed
rpm
Current
A
Gearing
i
Output
speed
rpm
Torque
Nm
Opening
time
sec
Power
output
kW
Speed
rpm
Current
A
Gearing
i
Output
speed
rpm
Torque
Nm
Opening
time
sec
0.25
2800
0.45
750
3.80
275
8
0.37
1400
0.93
400
3.49
450
8
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
4|9
V-KING INDUSTRIAL FOLDING GATE
TECHNICAL DATA SHEET
Gate dimensions and ordering dimensions. Installation dimensions.
SINGLE-LEAF
GATE
Post
dimensions
W
Post
height
L
Required space
(without
cabinet)
Required space
(with DAAB
cabinet)
2000
Sj + 125
Ho + 250
160x160
2550
Sj + 750
Sj + 1225
2100
Sj + 125
Ho + 250
160x160
2650
Sj + 750
Sj + 1225
2200
Sj + 125
Ho + 250
160x160
2750
Sj + 750
Sj + 1225
2300
Sj + 125
Ho + 250
160x160
2850
Sj + 750
Sj + 1225
2400
Sj + 125
Ho + 250
160x160
2950
Sj + 750
Sj + 1225
2500
Sj + 125
Ho + 250
160x160
3050
Sj + 750
Sj + 1225
2000
Sj + 150
Ho + 250
200x200
2550
Sj + 900
Sj + 1350
2100
Sj + 150
Ho + 250
200x200
2650
Sj + 900
Sj + 1350
2200
Sj + 150
Ho + 250
200x200
2750
Sj + 900
Sj + 1350
2300
Sj + 150
Ho + 250
200x200
2850
Sj + 900
Sj + 1350
2400
Sj + 150
Ho + 250
200x200
2950
Sj + 900
Sj + 1350
2500
Sj + 150
Ho + 250
200x200
3050
Sj + 900
Sj + 1350
Sj
W
So
Sj
W
So
Sj - clear width (ordering dimensions),
So - width between posts,
Ho - gate leaf height,
L - post height from the driveway level,
W - post dimensions.
V-KING right-handed single-leaf gate
closed
5|9
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
V-KING right-handed single-leaf gate
open
L
Leaf height
from the
driveway level
Ho
3000 - 4000 mm
(in min. 50 mm increments)
Width
between
posts
Ho
1500 - 2950 mm
(in min. 50 mm increments)
Gate
height
Ho
L
Gate ordering width
Sj (clear width)
V-KING INDUSTRIAL FOLDING GATE
TECHNICAL DATA SHEET
DOUBLE-LEAF
GATE
Post
dimensions
W
Post
height
L
Required space
(without
cabinet)
Required space
(with DAAB
cabinet)
2000
Sj + 250
Ho + 250
160x160
2550
Sj + 750
Sj + 1350
2100
Sj + 250
Ho + 250
160x160
2650
Sj + 750
Sj + 1350
2200
Sj + 250
Ho + 250
160x160
2750
Sj + 750
Sj + 1350
2300
Sj + 250
Ho + 250
160x160
2850
Sj + 750
Sj + 1350
2400
Sj + 250
Ho + 250
160x160
2950
Sj + 750
Sj + 1350
2500
Sj + 250
Ho + 250
160x160
3050
Sj + 750
Sj + 1350
2000
Sj + 300
Ho + 250
200x200
2550
Sj + 900
Sj + 1500
2100
Sj + 300
Ho + 250
200x200
2650
Sj + 900
Sj + 1500
2200
Sj + 300
Ho + 250
200x200
2750
Sj + 900
Sj + 1500
2300
Sj + 300
Ho + 250
200x200
2850
Sj + 900
Sj + 1500
2400
Sj + 300
Ho + 250
200x200
2950
Sj + 900
Sj + 1500
2500
Sj + 300
Ho + 250
200x200
3050
Sj + 900
Sj + 1500
Sj
Sj
W
So
L
Leaf height
from
the
driveway level
Ho
6000 - 10000 mm
(in min. 50 mm increments)
Width
between
posts
Ho
3000 - 5950 mm
(in min. 50 mm increments)
Gate
height
Ho
L
Gate ordering width
Sj (clear width)
W
So
Sj - clear width (ordering dimensions),
So - width between posts,
Ho - gate leaf height,
L - post height from the driveway level,
W - post dimensions.
V-KING double-leaf gate
closed
V-KING double-leaf gate
open
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
6|9
TECHNICAL DATA SHEET
V-KING INDUSTRIAL FOLDING GATE
Equipment
SINGLE-LEAF
V-KING folding gate
DOUBLE-LEAF
V-KING folding gate
EXECUTION
Corrosion protection: hot-dip galvanised
Corrosion protection: hot-dip galvanised + standard RAL colour (RAL 5010 gentian blue,
RAL 6005 moss green, RAL 7016 anthracite grey, RAL 7030 stone grey, RAL 9016 traffic white,
RAL 9005/MAT jet black)
Powder coated in any RAL colour
●
●
Anti-climb spikes
●
●
DAAB’s MT type drive unit for double-lea
the
driveway level
Ho
6000 - 10000 mm
(in min. 50 mm increments)
Width
between
posts
Ho
3000 - 5950 mm
(in min. 50 mm increments)
Gate
height
Ho
L
Gate ordering width
Sj (clear width)
W
So
Sj - clear width (ordering dimensions),
So - width between posts,
Ho - gate leaf height,
L - post height from the driveway level,
W - post dimensions.
V-KING double-leaf gate
closed
V-KING double-leaf gate
open
TECHNICAL DATA SHEET – V-KING INDUSTRIAL FOLDING GATE
6|9
TECHNICAL DATA SHEET
V-KING INDUSTRIAL FOLDING GATE
Equipment
SINGLE-LEAF
V-KING folding gate
DOUBLE-LEAF
V-KING folding gate
EXECUTION
Corrosion protection: hot-dip galvanised
Corrosion protection: hot-dip galvanised + standard RAL colour (RAL 5010 gentian blue,
RAL 6005 moss green, RAL 7016 anthracite grey, RAL 7030 stone grey, RAL 9016 traffic white,
RAL 9005/MAT jet black)
Powder coated in any RAL colour
●
●
Anti-climb spikes
●
●
DAAB’s MT type drive unit for double-lea
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
6 p | EN
Modest
Fisa tehnica
7 p | EN
PI130