Protectie la foc pentru rosturi in pardoseli VEDA Fire stop systems
VEDAFEU Fire Stop
For expansion joints, precast joints, head of walls, curtain walls, slab nosings
1 – Cover page VEDAFEU - April 2011
VEDAFEU
Fire stop systems for expansion joints, precast joints, head of walls, curtain walls, slab nosings
Reminder of the European Legislation : European Classification Standard EN 13501-2 (May 2004): Fire rating of building construction products and systems. This standard details the test procedures: orientation of the samples, movement capacity, junction types, joint width, etc. European Test Method Standard EN 1366-4 (November 2006): Fire resistance testing of construction systems, part 4: Expansion joints filler. This standard details a test method for fire-resistant joint filler according to their final use, with or without movements during the tests. This standard has been approved by the CEN (European Committee for Standardization) in April 2006 and then approved as a valid French standard on October 5th 2006 with implementation on Novembe
r 5th, 2006. Decree dated 22 March 2004 (French Ministry of Interior) related to the fire resistance of construction materials and systems. This Decree put in force the European Standards and cancels the former Decree dated August 3rd, 1999.
-
-
Direct consequences of legislation : As a direct consequence, the Test Reports issued by European Laboratories before November 2006 do not comply with the EN 1366-4 standard requirements. Therefore, the concerned European building material manufacturers of fire stop systems for expansion joints must provide an official European classification report either issued by French Laboratories CSTB or EFECTIS ; British Laboratories Warrington Fire Research or Chiltern International Fire Ltd. ; German Laboratories MPA NRW or F.M.P.A. Baden-Württemberg or MFPA-Leipzig ; Spanish Laboratories AFITI/LICOF or L.G.A.I. ; Italian Laboratories CSEA or C.S.I. S.p.A. ; etc… that summarises the performances on the tests.
© GV2 - 2010 - Tous droits réservÃ
©s – All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
2 – European legislation - April 2011
Any reports issued before November 05, 2006 which don’t comply with above mentioned European Norms cannot be approved. The use of products and systems not in accordance with the current legislation would raise penal sanctions in case of fire. The Vedafeu fire stop systems have been officially tested and validated as per latest European standards.
VEDAFEU Fire stop for expansion joints
VEDAFEU RANGE
For standard and seismic joins, officially tested and approved for joint widths from 10 to 840 mm
VEDAFEU C fire stop backer rods
x x For joint widths from 10 to ” 120 mm, with or without waterproofing system, with or without joint cover. Officially Rated EI 240 minutes. For joint widths > 120 mm and ” 200 mm, without sealan
t, with joint cover. Officially Rated EI 240 minutes. Tests carried out according to latest European Legislation.
VEDAFEU N fire stop blankets
For initial joint widths from 100 to 560 mm. Officially rated from EI 60 to 240 minutes depending on initial joint width and blanket composition. Tests carried out according to latest European Legislation. The new and innovative VEDAFEU N products, systems and installation methods have been patented.
© GV2 - 2010 - Tous droits réservés – All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
3 – The range - April 2011
VEDAFEU Fire stop for expansion joints
VEDAFEU C FIRE STOP BACKER RODS
For standard and seismic joins, officially tested and approved for joint widths from 10 to 200 mm
x x
For joint widths from 10 to ” 120 mm, with or without waterproofing system, with or wi
thout joint cover. Officially Rated EI 240 minutes. For joint widths > 120 mm and ” 200 mm, with or without waterproofing system, with joint cover. Officially Rated EI 240 minutes. Tests carried out according to latest European Legislation.
© Tous droits réservés – All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
4 – VEDAFEU C fire stop backer rods - April 2011
VEDAFEU C FIRE STOP SYSTEMS
Introduction
The VEDAFEU C ¿re stop backer rods are made of compressible, non combustible, binder free, mineral ¿bres overbound with glass ¿bre yarn. It is supplied as a highly Àexible, moisture, fungus and micro-organisms resistant, cylindrical backer rod. Insensitive to water and humidity, it is also resistant to most of aggressive chemicals except hydrochloric acid and concentrated alkalis. VEDAFEU C is free from asbest
os and ceramic. CertiÀcate n° RS 08-162/A dated March 26th 2009 and valid until September 30th 2013. The VEDAFEU C systems comply with the latest European Legislation and Standards : BS United Kingdom – NF France – DIN Germany - UNE Spain - UNI Italy - NEN Netherlands, etc. • European Classi¿cation Standard EN 13501-2 (May 2004) • European Test Method Standard EN 1366-4 (Novembre 2006) • French Ministry of Interior Decree dated March 2004, 22nd All the VEDAFEU C systems for initial joint widths of 10 mm to 200 mm have been tested without any sealant and with a lateral movement of + 20 % during testing. All the VEDAFEU C systems have been rated EI 240 which means that they successfully stopped the ¿re and Àames, guaranteed thermal protection during the maximum duration of the test without failure : 240 minutes or 4 hours, which is the highest possible rating as per latest European Standard 13501-2 and 1366-4. The VEDAFEU C ¿re stop backer rods have also been tested for t
heir acoustic properties, compressibility etc… Please refer to the concerned speci¿c data sheet. Economical and easy to install, the VEDAFEU C ¿re stop backer rods are available from stock in the range of 12 mm to 180 mm diameters, which are suitable for joint widths from 10 to 200 mm. For initial joint widths • 100 mm, we have developed some unique, innovative and patented blankets. Please refer to VEDAFEU N blanket data sheet for further details.
Applications
• The VEDAFEU C ¿re stop backer rods systems are used for horizontal and vertical structural movement joints in Àoors, walls, ceilings, precast panels joints, heads of walls, between curtain walls and horizontal slabs, etc.. • For stop ¿re walls, sheating passway and conduit • The VEDAFEU C ¿re stop backer rod systems ef¿ciently protect all types of buildings and civil works : hospitals, schools, airport terminals, malls and shopping centres, high rise buildings, hotels, carparks, stadiums, etc.
Installation of
VEDAFEU C Àre stop backer rod is fast and economical.
According to the Classi¿cation Certi¿cate n° RS08-162/A, the installation of VEDAFEU C ¿re stop backer rods depends on the initial width of the joints. For joints with an initial width from 10 mm to ” 120 mm, follow instructions as per Installation Method n° 1 For joints with an initial width from 120 mm to ” 200 mm, follow instructions as per Installation Method n° 2 Installed as per instructions, the VEDAFEU C systems ensure a perfect flame barrier and thermal insulation without the need of sealant nor complementary protection.
Exposed joints in floors, walls and ceilings usually require additional protection. Watertightness will be obtained by ¿lling in the exposed part of the joint with VEDAFLEX SIL silicone or VEDAFLEX PU polyurethane sealants, or by any other means like our special EPDM waterproo¿ng membrane. A mechanical protection will be obtained by installing a suitable joint cover, especially designed for flo
ors, walls or ceilings. According to part Q of the European guideline n° 97/69/CE, VEDAFEU C Àre stop backer rods are not classiÀed hazardous for human health.
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
5 - Datasheet VEDAFEU C - April 2011
Waterproofing - Protection
Extract of VEDAFEU C Fire Stop backer rods OfÀcial European ClassiÀcation CertiÀcate n° RS 08-162/A dated March 26th 2009 Validity September 30th, 2013
Joint opening: 10 to 120 mm without sealant, without joint cover VEDAFEU C OfÀcial ClassiÀcation : EI 240 – H – M 20 – B – W 10 à 120 (with backer rod ø 60 instead of ø 70 mm initial joint opening) EI 240 – V – M 20 – B – W 20 à 120
Initial joint opening (mm) 10 20 40
1
Ø VEDAFEU C (mm) 12 * 30 * 60 * 90 *
Compression factor of t
he joint (%) 17 33 33 33
Initial joint opening (mm) 80 100 120
Ø VEDAFEU C (mm) 120 * 150 * 180 *
Compression factor of the joint (%) 33 33 33
1
60
Except for Ø60mm backer rod in 40mm opening : EI 180 - H - M20 - B - W 40
For all other gaps, from 20 to 120 mm, apply a 33% compression factor minimum.
Joint opening: 10 to 200 mm without sealant, with joint cover VEDAFEU C OfÀcial ClassiÀcation : EI 240 – H – M 20 – B – W 10 à 200 EI 240 – V – M 20 – B – W 20 à 120
Initial joint opening (mm) 10 20 40 60 Ø VEDAFEU C (mm) 12 * 30 * 60 * 90 * Compression factor of the joint (%) 17 33 33 33 Initial joint opening (mm) 80 100 120 200 Ø VEDAFEU C (mm) 120 * 150 * 180 * 150 (x2) ** Compression factor of the joint (%) 33 33 33 33
Glossary, results and commentaries:
Testing conditions - Test performed between 2 horizontal concrete slabs (H or V), exposed to ¿re from the under face (B), jointing between 2 backer rod lengths being done with a special linking piece fo
r all joints openings. Results and Commentaries: - EI: Fireproo¿ng and thermal insulation: 241 minutes without failure for all the diameters. This corresponds to the maximum possible rating as per the 13501-2 European standard. - H: Horizontal construction support - V: Vertical construction support - M: Movement. The tests were performed with a + 20 % movement (the maximum joint opening being reached after 59 minutes of testing). - B: Factory and on-site manufactured connections. - W: Tested openings. The report N° RS 08-162/A is valid for all initial joint openings from 10 to 200 mm.
Refer to the classiÀcation report n° RS 08-162/A in its original form.
* Refer to installation method n°1 ** Refer to installation method n°2
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
6
- Extract of classi¿cation report - April 2011
Installation method n° 1
VEDAFEU C Àre stop backer rod for joints with an initial width from 10 to ” 120 mm
If necessary, remove formwork material such as polystyrene, VEDAPLAQUE honeycomb cardboard, etc. Repair all unsound concrete in and around the joint opening with compatible patching material. The contact surfaces must be clean, dry and free from contamination. Remove dust, using a brush or a broom.
Apply by brush a layer of VEDACOLLE C on both sides of the joint
While the adhesive is still wet, insert VEDAFEU C and ¿rmly press it by hand till perfect ¿t
At length ends, use special linking piece (patented)
Connected ¿re stop backer rod lengths
Joint cover in option
Rated EI 240 without sealant, with or without joint cover *
VEDACOLLE C adhesive coverage according to diameter of VEDAFEU C Based on proven coverage of 400 gr/ square meter for economical use and twice for generous application. VEDAFEU C Ø 12 - 20 mm. Min
imum 20 to 40 g per linear meter (10 g on each side of the joint) VEDAFEU C Ø 30 - 40 mm. Minimum 40 to 80 g per linear meter (20 g on each side of the joint) VEDAFEU C Ø 50 - 80 mm. Minimum 60 to 120 g per linear meter (30 g on each side of the joint)
7 - Installation method n°1 - April 2011
VEDAFEU C Ø 100 - 120 mm. Minimum 80 to 160 g per linear meter (40 g on each side of the joint) VEDAFEU C Ø 150 - 180 mm. Minimum 100 to 200 g per linear meter (50 g on each side of the joint) VEDAFEU C fire stop backer rod must be glued on both sides of the joint to prevent it from dislodging during joint movements.
*EI 180 for a backer rod Ø 60 and EI 240 for a backer rod Ø 70 in a 40 mm gap.
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA France - 52, avenue marcel Paul - 93297 Tremblay en France Cedex - Tel : + 33 (0)1 48 61 70 80 - Fax : + 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Installation method n° 2
VEDAFEU C Àre
stop backer rod for joints with an initial width > 120 and ” 200 mm
If necessary, remove formwork material such as polystyrene, VEDAPLAQUE honeycomb cardboard, etc. Repair all unsound concrete in and around the joint opening with compatible patching material. The contact surfaces must be clean, dry and free from contamination. Remove the dust, using a brush or a broom.
Install the special brackets in alternate fashion every 50 centimetres
50 cm
Fasten the brackets using a pneumatic gun or screws and plugs
Apply by brush a layer of VEDACOLLE C on both sides of the joint
Press down the VEDAFEU C backer rod
At length ends, use the special linking piece (patented)
Connected ¿re stop backer rod lengths
Installed VEDAFEU C backer rod
Rated EI 240 i.e 4 hours with joint cover
Detail : Joint cover, or ¿xed with VEDAFLEX SIL sealant or screws and plugs
Rated EI 240 without sealant, with joint cover © GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA France - 5
stop backer rod for joints with an initial width > 120 and ” 200 mm
If necessary, remove formwork material such as polystyrene, VEDAPLAQUE honeycomb cardboard, etc. Repair all unsound concrete in and around the joint opening with compatible patching material. The contact surfaces must be clean, dry and free from contamination. Remove the dust, using a brush or a broom.
Install the special brackets in alternate fashion every 50 centimetres
50 cm
Fasten the brackets using a pneumatic gun or screws and plugs
Apply by brush a layer of VEDACOLLE C on both sides of the joint
Press down the VEDAFEU C backer rod
At length ends, use the special linking piece (patented)
Connected ¿re stop backer rod lengths
Installed VEDAFEU C backer rod
Rated EI 240 i.e 4 hours with joint cover
Detail : Joint cover, or ¿xed with VEDAFLEX SIL sealant or screws and plugs
Rated EI 240 without sealant, with joint cover © GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA France - 5
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
10 p | EN
Joint Covers & compression profiles
Fisa tehnica
8 p | EN - FR
Facades and ceilings expansion joints