Porti batante DECORIO Gardia
GARDIA
GARDIA
GATE AND WICKET
GATES | DOORS | FENCES
Application: GARDIA gates and wickets are a good choice
for all types of private, public and industrial areas. Gates
can be installed to enclose premises, gardens, parks, schools,
kindergartens, stores, etc.
REL IABIL ITY
UNIVERSAL INSTALLATION
D U RA B I L I T Y
DURABLE
CONSTRUCTION
LOCINOX 180°
HINGES
REVERSIBLE
CORROSION
PROTECTED
Gates and wickets with main
posts, Vega 2D or Vega 2D
Super panel infill welded to
the frame, represent solid
and durable construction.
Reliable LOCINOX hinges
allow for 180° opening angle.
The hinges offer extensive
adjustability.
With the reversible construction, gates and wickets ensure
any possible opening direction. To achieve the required
swing direction, it is enough
to correspondingly install the
posts, and then, if needed,
reverse the symmetrical strike
and latch bolt.
Gates and wickets are hotdip galvanised or hot-dip
galvanised and polyester
coated for corrosion
protection.
GARDIA GATE AND WICKET
TECHNICAL DATA SHEET
Product description
General description
Application
GARDIA gate and wicket are system solutions designed for the
home and for industry. Main posts and a set of LOCINOX hinges and
lock are supplied with a gate or wicket. Corrosion protected by hop-dip
galvanising or Duplex system: hot-dip galvanising + polyester coating.
Application: GARDIA gates and wickets are a good choice for all types
of private, public and industrial areas. Gates can be installed to enclose
premises, gardens, parks, schools, kindergartens, stores, etc.
Technical characteristics
Leaf of gate or wicket
Infill of gate or wicket
The design of gate or wicket frame depends on its dimensions and can be
made of 60x40 or 80x40 mm sections. The leaf is equipped with reversible
lock and, in double-leaf gates, LOCINOX drop bolt. On side of the leaves
LOCINOX hinge brackets are welded.
Gate and wicket leaf are filled in with Vega 2D mesh panel with wire
diameter 6/5/6 or V
ega 2D Super 8/6/8. Welded mesh panel welded
to the frame.
Gardia double-leaf gate
gate infill: Vega 2D welded wire mesh panel
Gate and wicket posts
Posts of gates and wickets constitute an integral part of the product.
Posts have been designed to meet the strength requirements of the whole
construction. Posts are topped with caps type pyramid. To manufacture
the posts, the following sections has been selected: 80x80, 100x100,
120x120 and 160x160 mm.
Gardia wicket
gate infill: Vega 2D welded wire mesh panel
DIMENSIONS OF GATE AND WICKET POST
Gate width
So [mm]
Wicket width
So [mm]
Post made of
80x80 mm section
2000 - 2500
1000 - 1250
Post made of
100x100 mm section
3000 - 4000
1500 - 2000
Post made of
120x120 mm section
4500 - 5500
—
Post made of
160x160 mm section
6000 - 8000
—
A
— Not available.
Fig. 1
Dimensions of gate and wicket post.
2|8
TECHNICAL DATA SHEET – GARDIA GATE AND WICKET
GARDIA GATE AND WICKET
TECHNICAL DATA SHEET
Dimensions of Gardi
a gate and wicket
GARDIA DOUBLE-LEAF GATE
Leaf height (Ho)
in [mm]
Leaf width (So) in [mm]
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
600
;
;
;
;
;
;
;
—
—
—
—
—
—
800
;
;
;
;
;
;
;
—
—
—
—
—
—
1000
;
;
;
;
;
;
;
;
;
;
;
;
;
1200
;
;
;
;
;
;
;
;
;
;
;
;
;
1400
;
;
;
;
;
;
;
;
;
;
;
;
;
1600
;
;
;
;
;
;
;
;
;
;
;
;
;
1800
;
;
;
;
;
;
;
;
;
;
;
;
;
2000
;
;
;
;
;
;
;
;
;
;
;
;
;
2200
;
;
;
;
;
;
;
;
;
;
;
;
;
2400
;
;
;
;
;
;
;
;
;
;
;
;
;
GARDIA WICKET
Leaf height (Ho)
in [mm]
Leaf width (So) in [mm]
1000
1250
1500
600
;
;
;
2000
;
800
;
;
;
;
1000
;
;
;
;
1200
;
;
;
;
1400
;
;
;
;
1600
;
;
;
;
1800
;
;
;
;
2000
;
;
;
;
2200
;
;
;
;
2400
;
;
;
;
; Available Gardia gate and wicket.
— Not available.
Standard colours
POLYESTER COATING
(POWDER COATING)
DUPLEX System
Combining hot-dip galvanising with powder coating in DUPLEX
system ensures the extended durability of WIŚNIOWSKI fencing.
Despite the weather conditions, we have a lasting peace of mind that
WIŚNIOWSKI fencing will be visually appealing. The gates are available in hot-dip galvanised, or galvanised and polyester coated version.
The gates are available, as standard, in the colours as follows: RAL 6005
MATT, RAL 7016 MATT.
IRON
PHOSPHATISING
ZINC LAYER
(HOT-DIP GALVANISING)
RAL 7016 Anthracite grey
DUPLEX
RAL 6005 Moss green
NON-CHROME
PASSIVATION
Note: The actual colours and gloss levels may vary from those shown in this brochure.
STEEL
ELEMENT
TECHNICAL DATA SHEET – GARDIA GATE AND WICKET
3|8
GARDIA GATE AND WICKET
TECHNICAL DATA SHEET
Gate dimensions and ordering dimensions. Installation dimensions.
GARDIA
DOUBLE-LEAF GATE
Gate ordering width
(So) [mm]
Gate height
(Ho) [mm]
(leaf height)
Clear width
(Sj) [mm]
Total width
[mm]
Leaf
height
from the
driveway level
[mm]
Post
dimensions
(W) [mm]
Post height
[mm]
Clearance
between gate
edge and post
edge (G) [mm]
Gate leaf
frame [mm]
2000 - 2500
600 - 2400
Sj = So
So + 160
Ho + 80
80x80
Ho + 800
60x40
45
3000 - 4000
600 - 2400
Sj = So
So + 200
Ho + 80
100x100
Ho + 800
60x40
45
600 - 2400
Sj = So
So + 240
Ho + 80
120x120
Ho + 800
60x40
45
1000 - 2400
Sj = So
So + 240
Ho + 80
120x120
Ho + 800
60x40
45
6000 - 8000
1000 - 2400
Sj = So
So + 320
Ho + 80
160x160
Ho + 800
80x40
45
L
Ho
4500 - 5000
5500
Sj - clear width after the gate installation,
So - width between posts
(ordering dimension),
Ho - gate leaf height,
L - total post height,
W - post dimensions,
G - clearance between gate edge
and post edge.
Ground
level
Sj
G
So
GARDIA double-leaf gate
view from the premises side
4|8
G
TECHNICAL DATA SHEET – GARDIA GATE AND WICKET
W
GARDIA GATE AND WICKET
TECHNICAL DATA SHEET
GARDIA
WICKET
Wicket ordering width
(S
o) [mm]
Wicket height
(Ho) [mm]
(leaf height)
Leaf height
from the
driveway level
[mm]
Total width
[mm]
Clear width
(Sj) [mm]
Post
dimensions
(W) [mm]
Post height
[mm]
Wicket leaf
frame [mm]
Clearance
between wicket
edge and post
edge (G) [mm]
1000
600 - 2400
So - 35
So + 160
Ho + 80
80x80
Ho + 800
60x40
45
1250
600 - 2400
So - 35
So + 160
Ho + 80
80x80
Ho + 800
60x40
45
600 - 2400
So - 35
So + 200
Ho + 80
100x100
Ho + 800
60x40
45
600 - 2400
So - 35
So + 200
Ho + 80
100x100
Ho + 800
60x40
45
L
Ho
1500
2000
Sj - clear width after gate installation,
So - width between posts
(ordering dimension),
Ho - wicket leaf height,
L - total post height,
W - post dimensions,
G - clearance between wicket edge
and post edge.
Ground
level
Sj
G
So
W
GARDIA wicket
view from the premises side
TECHNICAL DATA SHEET – GARDIA GATE AND WICKET
5|8
GARDIA GATE AND WICKET
TECHNICAL DATA SHEET
Equipment
GARDIA double-leaf gate
GARDIA wicket
Gate and wi
cket leaf frame made of 60x40 or 80x40 mm sections depending on the
dimensions - see p. 4 and 5
;
;
Gate and wicket infill with Vega 2D mesh panel of 6/5/6 wire diameter or Vega 2D Super
of 8/6/8 diameter. Welded mesh panel welded to the frame
;
;
Reversible opening direction of gate or wicket
;
;
Posts are delivered with each gate and wicket and made of 80x80, 100x100, 120x120 and
160x160 mm sections depending on the dimensions. Posts are topped with caps type pyramid.
Post dimensions - see table 2
;
;
;
;
ł
;
ł
;
;
;
;
;
ł
;
;
ł
;
ł
;
Corrosion protection: hot-dip galvanised
;
;
Corrosion protection: hot-dip galvanised + RAL Standard (RAL 6005 moss green,
RAL 7016 anthracite grey)
;
;
Powder coated in any RAL colour
ł
ł
CONSTRUCTION
Set of hinges and a lock
Cylinder + 3 keys (1)
One-key system (1)
Polyamid handle plates and fixing bolts (2A)
Stainless steel handle plates and fixing bolts (2B)
Aluminium handle with spindle (3)
Drop bolt with Quick-fi
cket leaf frame made of 60x40 or 80x40 mm sections depending on the
dimensions - see p. 4 and 5
;
;
Gate and wicket infill with Vega 2D mesh panel of 6/5/6 wire diameter or Vega 2D Super
of 8/6/8 diameter. Welded mesh panel welded to the frame
;
;
Reversible opening direction of gate or wicket
;
;
Posts are delivered with each gate and wicket and made of 80x80, 100x100, 120x120 and
160x160 mm sections depending on the dimensions. Posts are topped with caps type pyramid.
Post dimensions - see table 2
;
;
;
;
ł
;
ł
;
;
;
;
;
ł
;
;
ł
;
ł
;
Corrosion protection: hot-dip galvanised
;
;
Corrosion protection: hot-dip galvanised + RAL Standard (RAL 6005 moss green,
RAL 7016 anthracite grey)
;
;
Powder coated in any RAL colour
ł
ł
CONSTRUCTION
Set of hinges and a lock
Cylinder + 3 keys (1)
One-key system (1)
Polyamid handle plates and fixing bolts (2A)
Stainless steel handle plates and fixing bolts (2B)
Aluminium handle with spindle (3)
Drop bolt with Quick-fi
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
6 p | EN
Modest
Fisa tehnica
7 p | EN
PI130